Husqvarna · 2026

TC85

85cc 2-stroke
🏍️
85cc 2-stroke
photo coming soon

Engine & specifications

Displacement
84.9cc
Bore × stroke
47 × 48.95 mm
Cooling
Not yet documented
Induction
Not yet documented
Power valve
Not yet documented
Starter
Kickstarter
MSRP (new)
Not yet documented

Transmission

Gears
6-speed
Clutch
Not yet documented
Final drive
Chain

Suspension

Front
XACT 43 WP Upside-Down fork, 43 mm
Front travel
10.9 in
Rear
XACT WP PDS mono shock
Rear travel
11.4 in

Brakes

Front
240mm
Rear
220mm
Type
Not yet documented

Wheels & tires

Front rim
Not yet documented
Rear rim
Not yet documented
Front tire
70/100
Rear tire
90/100

Dimensions & fuel

Seat height
32.9 in
Wheelbase
50.4 in
Ground clearance
12.1 in
Weight
150.3 lb (without fuel)
Fuel
Premix (2-stroke)
Premix ratio
Not yet documented

Fluids

Not yet documented from the service manual for this year.

Fluid types and capacities vary by year and model — we publish them only from the service/owner's manual. Always confirm against your manual before service.

Torque & spec reference

Not yet documented from the service manual for this year.

Torque values can strip threads or fail a component if wrong — we list them only as published in the service manual for this exact year-model. When in doubt, use your manual and a calibrated torque wrench.

Known issues

No verified year-specific issues documented yet.

Common upgrades

Not yet documented.

Parts compatibility

Not yet documented.

Manual links

We haven’t linked a verified manual for this year yet. Always service to your model-year owner’s/service manual.

Owner tips

Not yet documented.

Maintenance checklist

Air filter — clean or replaceevery ride

Do this basically every ride. A clogged filter chokes power; a torn one lets grit into the engine.

Air filter
Transmission oil~every 10h

A two-stroke’s gearbox runs on its own oil — clean trans oil keeps shifting and the clutch crisp.

Trans oil
Top-end / piston check~every 30h

The piston and rings wear out. Replacing on time prevents a far more expensive bottom-end failure. (2-strokes need it much sooner than 4-strokes — check your manual.)

Top-end kit
Chain & sprockets~every 40h

A worn chain and sprockets rob power and can snap. Replace as a set.

Chain & sprocket kit
Coolant~every 50h

Fresh coolant stops overheating and corrosion. Roughly once a season for most riders.

Coolant
Grease linkage & bearings~every 20h

Re-greasing the suspension linkage and wheel bearings keeps the bike handling right and saves bearings.

Grease

Guideline intervals only — they vary by year and how hard the bike is ridden. Always confirm exact figures in your owner's manual.

Aftermarket parts

Top-end / piston kitShop →Air filterShop →Graphics kitShop →Plastics kitShop →Chain & sprocketsShop →Exhaust pipeShop →

Each link opens an Amazon search for this model. MWR earns a small commission at no extra cost to you.

Used buying guide

Not yet documented.

Sources

Blank fields are values we haven’t verified for this exact year-model yet — we leave them blank rather than guess. Torque and fluid specs are published only from the service manual. Always follow your owner’s manual for service.